Most systems tell you the room got warm.
ChirpDat watches the power, the compressor, and the room — so you see trouble coming instead of cleaning up after it. Every zone in every facility you run, on one screen, with audit-ready records behind it.
Everything arrives provisioned. Live in days, not weeks — and we will walk your facility if you want us there.
Power, compressor, room — watched end to end
Cold storage failures tend to run the same course. Something goes wrong with the power. The compressor works harder, or stops. The room warms up. Most monitoring only notices that last step, by which point the failure has already happened.
Watch the whole chain and you find things nobody was looking for. One customer asked us for a single thing — tell us when grid power goes down. Monitoring the panel to answer that also showed a phase drawing 10.4 amps against 25.4 and 24.2 on the other two, an imbalance that led management to the source of a problem likely driving compressor failure. See how the chain works →
Paper logs won’t save you when it matters
If your temperature records live on a clipboard, three things are true:
The audit scramble
When the inspector asks for six months of cooler records, someone spends two days assembling paper logs — and hoping nothing’s missing.
The silent excursion
A compressor fails Friday night. Nobody knows until Monday morning. The product is gone, and so is the documentation of exactly when it happened.
The credibility gap
Handwritten logs can be questioned, backdated, or lost. When product safety is disputed, “trust me” isn’t a record.
Continuous monitoring. Defensible records. Zero disruption.
Industrial-grade sensors throughout your facility. Every reading, every threshold event, and every alert lands in a time-stamped, tamper-evident log — so when something drifts out of range your team knows in minutes, not Monday, and when an auditor asks you hand over a verified report for any date range in one click.
Always recording
24/7 automated monitoring and event detection, logged as it happens.
Alerts that reach a human
Warning and critical alerts by SMS, voice call, email, and webhook.
Calibration that never lapses
NIST-traceable sensor calibration, renewed annually.
Built for the places failures actually happen
Failures don’t start where the wiring is. They start in the back of a walk-in, on a rooftop condenser, in an outbuilding nobody visits on a Sunday.
ChirpDat puts a wireless sensor at each of those points. No conduit, no electrician, no holes in your building. A gateway collects every reading and sends it out over whatever connection the site actually has — our own cellular, your facility network, a wired uplink, or satellite-backed internet. We pick the best available path with you during deployment.
When a reading crosses a threshold you set, you hear about it in minutes — by SMS, voice call, email, and webhook — not on Monday when someone opens the door.
Monitoring without turning your facility into an IT project
The gateway can run fully isolated. On its own cellular connection it never touches your network — no firewall change, no VLAN work, no ticket in someone’s queue.
Nothing connects inward. No inbound access is required. Readings leave through the path chosen at deployment; nothing reaches back in.
Your network is optional. If you’d rather the gateway used it, that’s a single outbound path and nothing else.
Every reading is time-stamped at the moment it’s taken, and completed reports carry verification fingerprints that change if the record is altered afterwards.
What you’re buying
| What it is | What you get | What it does for you |
|---|---|---|
| Wireless sensors | One at each monitored point | Watches the spots wiring can’t reach |
| Gateway | Usually one per building | Carries readings out on the site’s best available connection |
| Dashboard | Live view of every zone | Shows status against your thresholds, any time |
| Alerts | SMS, voice call, email, and webhook | Reaches a human before product is lost |
| Reports | Daily, monthly, annual | Hands an inspector a record that holds up |
Live in days — without a single site visit
1. Your kit ships pre-configured
Every sensor arrives paired, labeled by zone, and ready to mount. The gateway is built and tested before it leaves our bench.
2. Mount and verify
Follow the illustrated placement guide, text us photos before permanent mounting, and we confirm signal coverage remotely — zone by zone.
3. You’re monitored
Dashboards go live, alerts are armed, and your compliance record starts building from day one.
Every record an auditor might ask for
We’re hardware-agnostic — we deploy industrial sensors from multiple manufacturers, so you’re never locked into one vendor’s ecosystem. What matters is the record it produces.
Temperature & Humidity
Cold chain compliance and HACCP critical control points. Coolers, freezers, aging rooms, processing floors, transport staging.
Door & Access Events
Cooler and freezer door discipline, propped-door alerts, and time-stamped access history for chain-of-custody documentation.
Power & Equipment State
Know the moment a compressor fails or a circuit trips — before you lose a freezer of product, not after.
Facility Conditions
Water leaks, CO2, and air quality — documented environmental conditions for facility risk and worker-safety records.
Records nobody can argue with
Every reading ChirpDat captures is time-stamped at the moment of measurement and stored in a tamper-evident log. Completed reports carry a cryptographic integrity hash — any alteration after the fact is detectable.
That means your compliance history is defensible: when an inspector, an insurer, or a customer questions your cold chain, you don’t offer a clipboard. You offer proof.
From paper logs to audit-ready in one week
A Colorado meat processor replaced clipboard temperature logs across their coolers, freezers, and processing areas with continuous ChirpDat monitoring — deployed zero-touch, with no interruption to production. Today every zone is recorded around the clock, out-of-range conditions trigger alerts in minutes, and audit reports that used to take days to assemble are generated in one click.
See your facility on a live dashboard
Book a 15-minute screen-share demo — a real compliance dashboard, real alerts, and real audit reports, on live data. See exactly what you’re buying before you spend a dollar.
Or call us directly: (719) 783-2727 — ChirpDat, Westcliffe, Colorado.