Live in days. Without a single site visit.

Most monitoring companies want to walk your plant, quote you a site survey, and put a technician on your floor. We built ChirpDat so none of that is necessary — and for facilities that want hands-on help, we do that too.

1 Kit ships pre-configured Sensors paired, labeled by zone, and bench-tested before shipping. 2 You mount and verify Follow the illustrated guide. Text us photos before permanent mounting — we confirm placement remotely. 3 You’re monitored Dashboards on, alerts armed, and audit-ready reports building from day one. Live in days — without a single site visit.
1 Kit ships pre-configured Sensors paired, labeled by zone, and bench-tested before shipping. 2 You mount and verify Follow the illustrated guide. Text us photos before permanent mounting — we confirm placement remotely. 3 You’re monitored Dashboards on, alerts armed, and audit-ready reports building from day one. Live in days — without a single site visit.

Path 1 — Zero-Touch Deployment (standard)

Your entire kit arrives ready to work.

  • You tell us your zones. Use the Build Your Own Monitoring tool or a 15-minute call — either way, we capture every monitored point, its thresholds, and who gets alerted.
  • The gateway is independent. It arrives with its own cellular connection — nothing touches your network unless you want it to.
  • Go-live is confirmed, not assumed. We verify a test alert reaches your phone before your compliance record starts.

No visitors in your plant. No production interruption.

Build Your Own Deployment →

Path 2 — White-Glove Onsite (for complex facilities)

We come to you.

Our team places and mounts every sensor, validates signal coverage zone by zone, configures everything on-site, and trains your staff on the floor before we leave. Best for multi-building campuses, facilities with challenging RF environments, or teams that simply want it handled end to end.

Quoted per facility.

Request an Onsite Quote →

You decide how deep it goes

We start with a site audit. We show you every zone and every piece of equipment that can be monitored, and what each one would tell you. You decide how deep it goes — some facilities monitor rooms, some monitor the power and the equipment that keeps those rooms cold.

Open the box, and it’s already yours

  • Sensors — configured, paired, and labeled with your zone names (COOLER-1 goes in Cooler 1; no guesswork)
  • Gateway — pre-provisioned, cellular-connected, tested on our bench
  • Illustrated placement guide with photos and placement rules
  • Mounting hardware
  • A go-live checklist and a direct line to us
A ChirpDat sensor mounted on a steel plate in a customer freezer: a flat, blank white panel with no cable, conduit, screen or buttons. Beside it the plant's own wall-mounted temperature controller reads 14 degrees Fahrenheit, with its probe lead looping away below.
A monitored point in a customer freezer. Nothing runs to the sensor — no conduit, no probe lead, no screen to read. The controller beside it is the plant’s own, kept for the physical spot check; the sensor records every reading in between.

See a sample daily report (PDF) →

A sample ChirpDat daily temperature report, showing minimum and maximum temperatures and in-range status for Main Cooler, Front Cooler, Walk-In Freezer, and Loading Dock, above the two SHA-256 verification fingerprints printed on every report.
Every completed report carries verification fingerprints — if the readings or the report change afterwards, the fingerprints change with them.

Then the system goes to work

Around the clock

Every reading recorded, time-stamped, tamper-evident.

When something drifts

Warning alerts notify your team. Critical alerts escalate by voice call until acknowledged.

Every reporting period

Compliance reports arrive by email automatically — daily, monthly, or both.

Every year

A freshly NIST-calibrated reference sensor ships to you, and your calibration documentation is updated.

“What if we mount something wrong?”

You won’t — and if you do, we’ll catch it. The placement guide covers the rules that matter for audit defensibility, the photo-verification step happens before anything is permanently mounted, and our remote signal check validates every zone before go-live. If a sensor isn’t performing after installation, we troubleshoot it remotely; if hardware is at fault, we ship a configured replacement.

See it before you buy it

Book a 15-minute screen-share demo — a live compliance dashboard, real alerts, and a real audit report generated in front of you. See exactly what you’re buying before you spend a dollar.

Book a 15-Minute Demo